HIDROPLAST is one component fast curing polymer seamless liquid membrane. HIDROPLAST has excellent resistance to movement and gives high performance waterproofing to above and below ground applications. HIDROPLAST can be applied to damp surfaces, is seamless, and fast curing.
AREA OF USE
HIDROPLAST has a wide variety of waterproofing application and can be used in the following situation:
· Roof decks
· Planter boxes
· Between slab waterproofing
· Plaza decks
· Water tanks
· Secondary waterproofing under tiles
· As a damp proof membrane under floors
· Fountains and pools
· One component, ready to use
· No mixing required
· Ease of application
· Excellent elongation
· Strong adhesion
· Fast Drying
· High performance
· Non toxic
· Solvent free
· Alkali resistant
· Tough Durable· Special colours available
The concrete/cementitious surface should be sound, clean, free of laitance, surface water and at least 14 days old.
HIDROPLAST can be applied on to damp surfaces. On very porous surfaces or in conditions of high ambient temperatures, it can be an advantage to pre-dampen the surface to aid the wetting out properties of HIDROPLAST (Surface should be dampened but free of surface water).
HIDROPLAST can be applied by brush, roller or spray and should be applied in two coats to a sound suitably prepared surface. It is recommended that the coats be applied at right angles to each other. The second coat should be applied after the first coat has become touch dry within twenty-four hours of the application of the first coat. The base junctions at upstands, parapet walls etc can be reinforced with HIDROTAPE fibre fabric sandwiched between two coats of HIDROPLAST HIDROPLAST should be protected from mechanical damage after the application has been completed. Cannot be left as a final coat.
HIDROPLAST has excellent adhesion to most surfaces, if there is any doubt a small scale application is suggested.
Cleaning of tools :
Tools, Brushes, Rollers etc easily cleaned with cold water immediately after application prior to the HIDROPLAST curing.
1.2 kg per square meter for a two coat application.
HIDROPLAST UV is supplied in 4, 7, 15 and 23 kg containers
TECHNICAL DATA PROPERTIES: Colour:
Crack Bridging Properties :
Drying Time (Depending on Weather Condition)
Touch Dry 1 Hr
HEATH AND SAFETY
Provide adequate ventilation and avoid contact with skin and eyes.
There are no reviews yet.